-
Shipping from the factory door
Shipping today
-
Send from branches
Shipping today
FINAL SILICONE GASKET MAKER
Final Gasket Maker Silicone, Is an acetoxy-based insulation material, gets flexible at room temperature (RTV), strong to 330℃ temperature takes shape of the using place.
Applications
Replaces cork, felt, asbestos, rubber, etc. Motors (intake manifolds, oil pans, valve covers, axle covers, thermostats, etc. Electric and electronic tools. Pipes, water installations, and these connections. Industrial ovens. At hot air cabals. joint places for vibration suction.
Colors:
Red, grey, black
Storage:
It must be protected against water, frost, and bad weather conditions. It must be kept on the wooden pallets at cool and dry condition. The open products must be consumed immediately. It should be stacked in a maximum of 6 layers. The product's storage is 15 months if the protection conditions shall comply with the above subjects.
Safety:
Keep out of reach of children. The application should take place in well–ventilated rooms so that cross-linker vapors can escape. During vulcanization, a total of 4% acetic acid is released thus these cross-linker vapors should not be inhaled in long periods or high concentrations. Avoid prolonged contact with skin. Avoid prolonged contact with skin. In case of contact with eyes, rinse immediately with water.
Technical Properties
11.03 g/cm3 [ISO1183]
-50℃ &+330℃
20 minutes
7hours for 2mm
0.7 N/mm2
0.45 N/mm2 [ISO 8339]
250 ml/minutes
+5℃ and +40℃