Before sticking, please to thoroughly clean the target surfaces of any oil, dust, or contaminants. Then, fully dry the surfaces.
stir for 30 seconds after adding 1 gram of hardener paste for every 100 grams of glue (in the metal container).
Before this mixture dries, you have little more than two minutes to utilize it. Indications: All natural and artificial stones (ceramics, tiles, mosaics, etc.)/Plastering of porous surfaces, stains and cracks/Installation of stones to metals/Intra-stones joints sealing/stones waterproofing strapping.
Specifications:
Two-component stone Binder Gelling time at room temperature: 1 to 3 minutes
Expiration date:
Two years following manufacture If dried properly, it is resistant to diesel, oil, water, heat, cold, sanding,
drilling and turning Safety considerations:
Keep in a dry, cool area, away from children, and out of direct sunlight.
The hardener cream that is included inside the tube poses a serious risk to the eyes. In case of contact with eyes, wash immediately with water and see an Optometrist immediately.
Restoring the combined glue to the can will cause the remaining components to dry out.
Notes:
After usage, this glue will completely solidify in 10 minutes (at room temperature). The rate of hardening increases if two or three grams of hardener are used for every 100 grams of glue. The glue harden more quickly if the surrounding air is hotter. The strength of the adhesive increases with surface roughness and unevenness.
Changing color table:
Black = soot White = titanium Red = iron oxide Blue = cerulean Yellow = greenish